Flash Advertise
| Build A HylaFax Server With AvantFax Frontend Using Debian Etch |
| From: www.howtoforge.com read times: 232 |
Provided by yangyi at 2007-12-24 16:57:47 |
Install Debian. I used the basic barebones install option. I did some things that were done because of preference, and not necessary. I have marked them approriately. I encourage contributions from anyone who would like to add or correct something in this HowTo to contact me so I can fix it. I have installed this setup twice following these instructions and used Avantfax 2.3.0. Thanks to all the resources who helped me figure this out. Especially Razametal, who submitted a fantastic Spanish language walkthrough on ecualug.org. **********optional section*************** Remove cdrom source: # nano /etc/apt/sources.list Throw a # in front of the cdrom source. Bring your box up to date: # apt-get update # apt-get upgrade Reboot: # shutdown –r now ***********end of optional section************ Remove ads Log in as root. Give the machine a static IP: # nano /etc/network/interfaces Replace the “inet dhcp” with something similar to this: iface eth0 inet static address 192.168.1.51 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Reset the connection: # ifdown eth0 && ifup eth0 ***********optional*********** Install ssh server: # apt-get install openssh-server Log in as root via PuTTY (or continue on the terminal). ***********end of optional section********* At this point, you need to know what port your modem is at. It should be at one of the /dev/ttyS*'s. If you don't know this, start googleing. Install hylafax: # apt-get install hylafax-server # faxsetup Allow it to run faxmodem to connect the modem. Use defaults except for: # Area code [415]? <your area code> # Phone number of fax modem [+1.999.555.1212]? <your phone number> # Local identification string (for TSI/CIG) ["NothingSetup"]? <a name for your fax server> # Protection mode for received facsimile [0600]? 0644 # Protection mode for session logs [0600]? 0644 # Protection mode for ttyS0 [0600]? 0666 Use class 1 modem unless you know better. Allow users from your subnet access to the fax service: # nano /etc/hylafax/hosts.hfaxd Add to the end of the file: 192\.168\.::: Reboot: # shutdown -r now Test the server: # faxstat -a -s You should get something like this: # HylaFAX scheduler on <your server name>: Running # Modem ttyS2 (<your phone number>): Running and idle Add a fax user. This will create a user named "user" with userID 101 and no password. # faxadduser -u 100 user Add an administrator. This will create a user named admin with admin password <password>: # faxadduser -a <password> -p <password> -u 100 admin At this point, hylafax works. You can test it by connecting a client like WHFC to try it out. If you need to switch up the config later, use these files: /etc/hylafax/config /etc/hylafax/config.ttyS* Now, lets get messy and install a cute web front end on it. Install the prerequisites: # apt-get install apache2-mpm-prefork apache2-utils apache2.2-common \ libapache2-mod-php5 libapr1 libaprutil1 libpq4 libsqlite3-0 php5-cli php5-common \ mysql-server imagemagick libtiff4-dev netpbm libnetpbm10-dev libungif-bin \ libungif4-dev sudo postfix php-mail php-mail-mime php-file php-db php5-mysql \ ap2 psutils wdiff # cd /usr/src # wget http://easynews.dl.sourceforge.net/sourceforge/avantfax/avantfax-2.3.0.tgz # tar zvxf avantfax-2.3.0.tgz # cd avantfax-2.3.0 You can edit avantfax/includes/config.php if you need to, but I didn't have to change anything. Move avant to web folder and set permissions: # mv /usr/src/avantfax-2.3.0/avantfax /var/www/ # chmod -R 777 /var/www/avantfax/tmp /var/www/avantfax/faxes Rename original faxrcvd and notify scripts. Replace with avantfax ones: # cd /var/spool/hylafax/bin # mv faxrcvd faxrcvd.old # mv notify notify.old # ln -s /var/www/avantfax/includes/faxrcvd.php /var/spool/hylafax/bin/faxrcvd # ln -s /var/www/avantfax/includes/notify.php /var/spool/hylafax/bin/notify # mv /usr/bin/faxcover /usr/bin/faxcover.old # ln -s /var/www/avantfax/includes/faxcover.php /usr/bin/faxcover Edit create_tables.sql to use avantfax database: # nano create_tables.sql Add "USE avantfax;" to top. Edit setup.sh to chown to "root.root": # nano setup.sh Change apache.apache to "root.root". Run the setup script: # ./setup.sh Add two scripts to root's crontab: # crontab -e # runs once an hour to update the phone book 0 * * * * /var/www/avantfax/includes/phb.php # runs once a day to remove old files 0 0 * * * /var/www/avantfax/includes/remold.php Switch up your Apache settings: # nano /etc/apache2/sites-enabled/000-default Change it to this: NameVirtualHost * <VirtualHost *> ServerAdmin webmaster@localhost DocumentRoot /var/www/avantfax <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/avantfax> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all # This directive allows us to have apache2's default start page # in /apache2-default/, but still have / go to the right place #RedirectMatch ^/$ /apache2-default/ </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /phpmyadmin "/usr/share/phpmyadmin/" <Directory "/usr/share/phpmyadmin/"> Options Indexes MultiViews FollowSymLinks </Directory> Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Restart Apache: # /etc/init.d/apache2 restart Go to http://<yourIP>/admin. Log in using u/n: afadmin, p/w: password. Configure your modems. For /dev/ttyS2, use ttyS2. Mind the caps... as always. Add a user. Reboot: # shutdown -r now Try to start hylafax: # /etc/init.d/hylafax start You will get some errors about one file being newer than the other. mv the newer file over the older one. Repeat 3 times. Once you can start it successfully, reboot: # shutdown -r now Now you users can access the fax server login at http://<faxhostname>. 原文链接: http://www.howtoforge.com/build-a-hylafax-server-with-avantfax-on-debian-etch |
